2-slot Hot and Cold Shock Test Chamber HZ-2012A

2-slot hot and cold shock test chamber is divided into high temperature area, low temperature area and test area three parts, each area is a unique insulation structure, so doing hot and cold impact test. The machine can be automatically or manually cycle the impact or selectively set the two areas or three areas to impact of hot and cold.
Whatsapp number: +86 137 1188 8650

Contact Us Download VR

Equipment summary:
2-slot hot and cold shock test chamber used binary cooling system that is very effectiveness for cooling, the cooling system is divided into the air-cooled and water-cooled. It also can be connected with a computer, but the record instrument is only for optional purchase. Color LCD touch-control operation interface with Chinese and English, easy to operate.

Applicable industries:
Applied to aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, and technical supervision departments; building materials ceramic; petroleum and chemical products, For high and low temperature impact test.

Techincal parameter:

Model 2012-49A 2012-80A 2012-150A
Size (CM) Inner box 35×35×40 50×40×40 60×50×50
Outer box 150×195×145 180×200×145 190×200×155
High-temperature range 80°C~200°C
Low-temperature range -55°C / -65°C / -75°C ~ -10°C
Testing room temperature high 60°C~150°C
low -10°C~-40°C / -55°C / -60°C
Heating-up time 60°C~200°C about 25min
Cooling time 20°C-55°C in 60min ; 20°C-65°C in 75min ; 20°C-75°C in 90min
Impact recover time High-temperature (150°C) about 30min
Low-temperature ( -40°C or -55°C or -60°C ) about 30min
Impact recover time 5min
Inner material SUS304 stainless steel
Outer material US304 stainless steel
insulation High-precision glass wool + PU foam rubber
Cooling system Copy blowing type or water-cooled, and environmental protection refrigerant.
Controller Man-machine interface with touch-programmable control
Protector Compressor slide off, overheating, over-temperature, over-pressure, dry heat, motor overload protection switch
Attachment Compartment frame 2, the test hole 1
Power (KW) 18 32 45
Power supply AC380V±10%, 3PH 50/60Hz


Recommended Products

Have problems with our Testing Machines?