Automatic Medical Making Machine is used for automatic production multilayer material flat finished product of the machine, you can use 1 ~ 3 layers of PP spun-bonded non-woven activated carbon and filtration material, the entire process from raw material into the expected nose line inserted, sealing side, the cutting finished product are a line automation work, according to the use of different raw materials, can achieve different standards such as FFP2. The equipment has stable performance, high yield, low defect rate and is easy to operate. Medical machine should work with several external ear machine.
Machine model: HZ-K100
Machine size: 2700 (L) *900 (W) *1900 (H) mm
Electric voltage: 220 v
Capacity: 120-150 PCS/min
Frequency ratio: 20 KHZ
Characteristics and Performance:
Automatic feeding system:
(1) Aluminum alloy frame, strong and beautiful, to ensure the size of finished products accurate;
(2) Stainless steel fixture, adjustable from left to right;
(3) Set the tensioning wheel, adjust the tensioning degree of the cloth, so as to effectively ensure the beauty and flatness of the finished product;
(4) Independent nose line conveying group for easy adjustment and maintenance.
Ultrasonic thermal bonding system:
1. Titanium alloy mold
In most machinery manufacturers use aluminum alloy, force show machine has been provided and actively advocate the use of titanium alloy mold, because of the relative to aluminum alloy oxidation, explosive Crack, not suitable for a long time of rush operation, short service life and other shortcomings, the advantages of titanium alloy is obvious:
A. Good toughness, suitable for long time vibration;
B. The thermal/ultrasonic conductivity is strong, which guarantees the beautiful welding and cutting effect of the product.
C. High hardness, not easy to crack, deformation and rust;
D. Although its cost is about ten times different from that of aluminum alloy, from the perspective of the whole production benefit, the choice of titanium alloy mold is obviously better than aluminum alloy.
2. Imported ultrasonic transducer, 20K international frequency standard, more powerful and stable output; Together with two sets of ultrasonic system, effectively ensure the product welding quality.
3. PLC program controls the movement of the whole machine to reduce the operation difficulty of users.
1. One-time molding products, improve the production speed
2. Product discharging position, roller roller, convenient for finished products to enter the container smoothly, easy to arrange and stack, save time and effort for the next process of ear band welding.
This machine has stable performance, continuous adjustable production speed, high production efficiency, up to 180 pieces per minute, convenient and accurate counting, high raw material utilization, simple and convenient operation and adjustment, high degree of automation, effectively reduce labor costs.
This machine is equipped with red, orange and green alarm:
1. Red light: when the red light is on, the device will alarm;
2. Orange light: the equipment stops running and the orange light is on;
3. Green light: the equipment is running and the green light is on.
Ultrasonic Outer Ear-loop Welding Machine HZ-K103
Full Automatic Face Mask Making Machine HZ-K105
Medical Particle Filtration Efficiency Test Machine HZ-9502
Martindale Abrasion Tester Fabric Textile Martindale Abrasion Test Machine 6 Position Abrasion Resistance Tester ASTM D4966, ISO12947 HZ-8029