Textile Strength Test Machine HZ-8001 is for testing a variety of textiles, leather, plastic products, tungsten (molybdenum) wire breaking strength or peel, and elongation at break data to test the principle of international preferred elongation (CRE).
Textile Strength Test Machine HZ-8001 is for testing a variety of textiles, leather, plastic products, tungsten (molybdenum) wire breaking strength or peel, and elongation at break data to test the principle of international preferred elongation (CRE), the determination of sample breaking strength and elongation, bursting strength, tear strength, and display, print the output of two ways.
Meet the standards:
1. GB/T15788 "geo Brad stretch test method for wide strip method the
2. GB/T16989" geotextile joints / seams by wide strip tensile test method "
3. ISO-10319-2008 Geosynthetics - Wide-width tensile test
4. GB/T13763 geotextile trapezoid tearing strength test methods "
Application industries:
Paper, research, and product quality supervision and inspection of industries and sectors ideal test instrument.
Technical parameters:
Model
HZ-8001
Maximum load
100N, 200N, 500N, 1KN, 2KN, 5KN, 10KN (option)
Accuracy class
1 / 0.5 grade
Effective force measurement range
0.2% to 100% (1) / 0.4% to 100% (0.5)
Force measurement accuracy
Show less than ± 1% of the value / show less than ± 0.5% of the value
Resolution of the testing machine
Maximum load 1/200 000, both inside and outside, regardless of file, and the full resolution of the same
Load Cell
Basic configuration: pull, pressure sensor (maximum load) a
Extended configuration: can be equipped with multiple sensors
Effective test width
Widening of Effective test width 390mm (or customize)
Effective stretching space
400, 500, 600mm (According to customer's requirements height)
The test speed range
0.001～500mm/min
Display accuracy
Show less than ± 0.5% of the value / show less than ± 0.2% of the value
Test sets of security device
E-limit protection
Test sets of lifting devices
Fast / slow two-speed automatic control, jog
Test units to return function
Manual or automatic two options, the end of the experiment automatically or manually returned to the highest speed test initial position
Overload protection
More than 10% of the maximum load, the machine automatically protect
Host size
800*550*2210mm(L*W*D)
Power system
Japan Panasonic AC servo motor + driver + high-precision ball screw
Power supply
220V, 50HZ
Power
0.4KW(According to the different force requirements, standard power motor)
Host weight
300 Kg
Size of sample: cut each sample to the final width of 200mm, sample length shall be sufficient to ensure fixture spacing of 100mm, the length of which shall be parallel to the direction of the maximum load to be tested. To control slippage, two 100mm mark lines can be drawn vertically between the entire width of the sample and the length of the sample to indicate the spacing length.
Test environmental The temperature is 20℃±2℃ and the relative humidity is 65%±5%
How to test Adjust the clip spacing to 100±3mm. Select the load formula so that the tensile force is between 30% and 90% of the full range. Set the tensile rate of the tester to 20mm/mim.
