Features
Thermal Shock Chambers are used to do high-temperature impact test or low-temperature impact test, the maximum time is up to 9999 minutes, the most cycle time is up to 9999 times. The machine can be automatically or manually cycle the impact or selectively set the two areas or three areas to impact of hot and cold. It used binary cooling system that is very effectiveness for cooling, the cooling system is divided into the air-cooled and water-cooled. It also can be connected with a computer, but the record instrument is only for optional purchase. Color LCD touch-control operation interface with Chinese and English, easy to operate.

Corresponding Standard
1. GB/T2423.1-1989 low-temperature testing method
2. GB/T2423.2-1989 high-temperature testing method
3. GB/T2423.22-1989 temperature test
4. GJB150.5-86 temperature impact test
5. GJB360.7-87 temperature impact test
6. GJB367.2-87 405 temperature impact test

Applicable Industries
Thermal shock chambers applied to aviation, military, ships, electrical, electronics, instruments and meters; medical equipment; civilian nuclear energy; colleges and universities; research laboratories; commodity inspection, arbitration, and technical supervision departments; building materials ceramic; petroleum and chemical products, for high and low temperature impact test.

Technical parameter:

Model		2012B-49L	2012B-80L	2012B-150L
Size (W×H×D)mm	Inner box	35×35×40	50×40×40	60×50×50
	Outer box	150×195×145	180×200×145	190×200×155
High-temperature range		80°C ～ 200°C
Low-temperature range		-65°C～-1 0°C
Testing room temperature	High	60°C ～ 150°C
	Low	-10°C～-55°C
Heating-up time		60°C ～ 200°C about 25min
Cooling time		20°C～-65°C about 75min
Impact recover time		High-temperature (150°C) about 30min Low-temperature (-40°C or -55°C or -60°C) about 30min Impact recover time 5min
Weight		2.5KG	5KG	10KG
Inner material		SUS ＃ 304 stainless steel
Outer material		SUS ＃ 304 stainless steel
Insulation		High-precision glass wool + PU foam rubber
Cooling system		Copy blowing type or watercooled, and environmental protection refrigerant.
Controller		Man-machine interface with touch-programmable control
Protector		Compressor slide off, overheating, over-temperature, over-pressure, dry heat, motor overload protection switch
Attachment		Compartment frame 2, the test hole 1
Power		18KW	32KW	45KW
Power supply		AC380V±10%, 3PH 50/60Hz