Equipment summary:
Digital Tensile Testing Machine can be tested the constant-velocity loading, constant- velocity displacement. Floor-standing models, it is taken account of modern industrial design and ergonomics in modeling and coating..
Corresponding standard:
Material Testing Laboratory Instrument for automobile production meet GB/T16491-1996 electronic universal testing machine.
Technical parameter:
|
Model
|
hz-1010B
|
|
Maximum load
|
5KN,1ton,2ton,option
|
|
Accurate grade
|
1 grade /0.5 grade
|
|
Effective measuring range
|
0.2%~100%(1 grade)/0.4%~100%(0.5 grade)
|
|
Measuring accuracy
|
the value ±1% / the value ±0.5%
|
|
Tester resolution
|
Max load 1/200000,regardless of inside or outsideconstant the resolution
|
|
Load sensor
|
Basic configuration:sensor (max load): one
Extended configuration:can add more sensors
|
|
Effective testing width
|
450mm (or customize)
|
|
Effective tensile space
|
400,500,600mm (or customize)
|
|
Range of testing speed
|
0.001~500mm/min
|
|
Accruacy of displacement measurement
|
Tolerance: ±0.5%/ tolerance: ±0.2%
|
|
Deformation of measured system
|
Min span: 10mm,Max range of deformation :800mm
Extended deformation: Min span: 25mm,50mm,100mm,
range of deformation: 5mm,10mm,25mm
|
|
Accuracy of measured deformation
|
Tolerance :±0.5%
|
|
Safety
|
Electronic-limit protection
|
|
Testing platform moving device
|
Fast /slow two speeds to control,can jog
|
|
Back to function of testing platform
|
Manual or automatic operation,After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
|
|
Overload protection
|
Overload 10%,automatic protection
|
|
Fixture
|
A set of tensile fixture
|
|
Machine size
|
1200*530*1800mm (lenght*width*height)
|
|
Motor
|
Panasonic AC servo motor and drive
|
|
Power supply
|
220V,50HZ,
|
|
Power
|
0.75KW (depending on different force, using different motor)
|
|
Weight
|
(about ) 500 Kg
|
Main feature:
Material Testing Laboratory Instrument adopted photoelectric encoder to measure the displacement, the controller uses the embedded single-chip microcomputer structure with multi-function software, which combined with measurement, control, culculation and storage. It can automatic calculate the stress, rate of elongation (need to add with extensometers), tensile strength, elastic modulus, automated statistical results; automatically recorded the biggest point, breaking point, the designated point value or the rate of elongation; Using computer to display the dynamic curves in the testing process and process the data, After testing, it can re-analysis and editing the data by amplifying the curves through the graphics processing module, printing reports, product performance reached the international advanced level.
