Equipment summary:
Automatic Rupture Strength Tester HZ-3014C is suitable for testing the burst strength of base paper, corrugated board, leather, cloth, synthetic leather, etc. This machine is a fully automatic bursting strength testing machine. It only needs to put in the sample, that is, automatic detection, automatic test, automatic oil pressure return and automatic calculation, storage of test data and printing. As an important basis for controlling the quality of finished products, it is an indispensable equipment for quality inspection.

Application:
This machine is suitable for the burst strength test of leather, cloth and cardboard.

Equipment principle:
1. This machine adopts signal transmission pressure, and the maximum burst strength value is automatically retained when the sample breaks.
2. Place the test piece on the mold, clamp it with the test piece, and apply pressure evenly so that the sample and the film are free to bulge until the sample breaks. The maximum hydraulic pressure is the test piece's burst strength. value.

Corresponding standard:
operative standard:ISO-2759,GB-6545,JIS-P8112,L1018,ASTM-D2210,TAPPI-T403

Technical parameters:

Item		Specification
Induction method		Pressure transducer
Instruction mode		Digital type (press button control, digital display)
Unit		Can be show as: kgf\psi\kpa
		A、psi: means the force in pounds per inch
		B、Kgf: means the force value is kg/cm 2
		C、kpa: means the force unit is kPa
		Note: The unit to which the indicator light points is the unit of the value displayed on the current force value screen.
Capacity (option)	High pressure type	0～10kg/cm2 (accuracy: 0.1kg/cm2)
	Low pressure type	0～1kg/cm2 (accuracy: 0.1kg/cm2)
Clamp ring diameter	Up ring	High pressure: Φ31.5mm, low pressure :Φ30.48mm
	Down ring	High pressure: Φ31.5mm, low pressure: Φ31.75mm
Oil pressure gauge		0～35kg/cm2
Motor		AC220V　90W
Dimension		About 53cm×23.5cm×57cm
Weight		About 65㎏
Power supply		1∮, AC220V, 1A
Power consumption		About 150W