HZ-2019 High And Low Temperature Chamber
HZ-2019 High And Low Temperature Chamber
HZ-2019 High And Low Temperature Chamber

HZ-2019 High And Low Temperature Chamber

High And Low Temperature Chamber can test the material property in high and low temperature, such as electrical, electronic products, as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements.
Contact number: +86 13711888650

Contact Us Download VR

Equipment summary:
High And Low Temperature Chamber can test the material property in high and low temperature, such as electrical, electronic products, as well as their original devices, The testing equipment is mainly made according to the national standard and user-defined requirements, it simulate the environment to test proformance of material as well as other relevant characteristics of physical at low temperature or high temperature, Through testing to determine product performance whether it is still be able to meet the intended requirements.
 
Corresponding standard:
1. GB 10589-89 low temperature testing condition
2. GB 10592-89 high temperature testing condition
3. GB 11158-89 high temperature testing condition
4. GB/T5170.2-1996 basic parameters of environmental testing method for Electrical and   electronic products, 
5. GB2423.1-89 The basic test regulation for electrical and electronic products,  Test A: low-temperature test method
6. GB2423.2-89 The basic test regulation for electrical and electronic products,  Test B: high-temperature test method
7. The basic test regulation for electrical and electronic products,  Test: high-low-temperature test method

Technical parameter:
Model HZ-2019-80L HZ-2019-100L HZ-2019-150L
Inner size D×W×H 40*50*40 cm 40*50*50 cm 50*60*50 cm
Index Temperature -40°C to 150°C
Fluctuate/
uniformly
≤±0.5°C /.+2°C to 3°C
Heating-up time -40°C to 100°C about 55min
Cooling time 25°C to -70°C about 80min
Control
system
Controller LED digital P,I,D, + S,S,R.microcomputer controller
Accuracy Setting accuracy temperature ±0.1°C,directed accuracy temperature ±0.1°C,resolution ±0.1°C
Sensor Platinum resistance PT100Ω/MV
Heating system Independent system, nickel-chromium alloy electric heating type heater
Cooling system Totally enclosed air-cooled single-stage compression refrigerate mode / original from
Frence "Tecumseh" / totally enclosed air-cooled re-compression refrigerate mode
Circulatory system Temperature, low-noise, air-conditioning-type motor. Multi-vane centrifugal wind wheel
Material Outer material High-quality carbon steel plate. Phosphide electrostatic spray treatment /
SUS304 stainless steel hairline treatment
Inside material SUS304 High-quality stainless steel light board
Insulation material Rigid polyurethane foam, ultra-fine glass fiber cotton
Insulation Double-resistant high-temperature aging of silicone rubber seal
Standard collocation a set of Multi-heated glass window attached lighting, testing product shelf 2 pcs,
test leads holes (25,50 mm) 1 pcs
Protector Leak current, short circuit, over temperature, motor overheating, over-pressure
compressor, overload, over-current protection
Timer  0.1 to 999.9 (S,M,H) adjustable
Voltage AC380V±10%, 50±0.5Hz, Three-phase five-wire system
Working environment 5°C to 30°C ≤85%R.H





 

Recommended Products

Have problems with our Testing Machines?