Milling De-weighting Balancer is mainly used for balance measurement and milling to remove weight of water pump impeller/brake disc/brake hub/etc. The characteristic is that the balance measurement of the rotor and the milling and deduplication are completed on the same equipment..
Contact number: +86 13711888650
Milling De-weighting Balancer
The characteristic is that the balance measurement of the rotor and the milling and deduplication are completed on the same equipment.
High production efficiency, high precision, convenient measurement, milling and weight removal, with different fixtures to meet the needs of various specifications of products, suitable for batch and single-piece production of products.
|Workpiece mass range（kg）||5-160|
|Maximum outer diameter of workpiece（mm）||Φ1000|
|Maximum diameter at the transmission frame（mm）||Φ300|
|Unbalance Reduction Rate（URR）||≥85%|
|Range between two support frames（mm）||80-1000|
|Balance speed range（r/min）||300～5000|
Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006
HZ-9742B Wheel Hub Automatic Unbalance and End Face & Radial Runout Marking Detection Line Wheel Hub Assembly Line