Instrument reference standard: GB / T3399 " Plastic thermal conductivity test method, Heat protection plate method, GB / T3139-2005 (test method for thermal conductivity of fiber reinforced plastics) (test method for FRP thermal conductivity), GB / 10294-2008 (determination of steady state thermal resistance and related properties of protective thermal plate method), Requirements for the thermal conductivity measurement of extruded polystyrene foam in GB / T 10801.1-2002 (molded Styrofoam) and GB/T10801.2-2002 (extruded Styrofoam (XPS)).Main test plastic, glass, fiber, polyurethane foam, thermal insulation materials, heat insulation materials, etc.It is widely used in colleges and universities, scientific research units, quality inspection departments and manufacturers of material analysis and testing.
The key technical indexes Thermal conductivity tester
1.Range of thermal conductivity: 0.0010~3.000W/mk;
2.Test accuracy: ± 3%;
3.Sample size: 300300 (10-50) mm;Flatness： < 0.05 mm.
4.Thermal surface temperature range: room temperature ~100℃, temperature rate 0.01℃；
5.Cold surface temperature range: 0~90℃, temperature separation rate of 0.01℃;
6.Continuous pull computer control automatic test, data processing, and generate detection report;
7.Temperature difference between hot and cold plate: the default value of 20℃, users can also set by themselves, common standard temperature difference: 20℃ common temperature difference range of 15-25℃
8.Voltage:220V，50HZ.
Instrument Configuration
1、A set of HZ-7039D dual tablet test host
2、A HZ-7039D test software
3、A set of communication interface and data cable
4、A high-precision constant temperature sink
5、A set of rubber water pipe (with pipe card)
6、A brand desktop computer (configured according to the contract, as provided by the buyer)
