Drive Shaft Balancing Machine is mainly used for the balance correction of the cross flow fan of the air conditioner and other similar rotating parts. Drive Shaft Balancing Machine is an instrument used to determine the unbalance of the rotor.
Contact number: +86 13711888650
Drive Shaft Balancing Machine is mainly used for the balance correction of the cross flow fan of the air conditioner and other similar rotating parts. The balancing machine is an instrument used to determine the unbalance of the rotor. The balancing machine is a hard-supported balancing machine. The swing frame is very rigid. The measurement result of the dynamic balancing machine is used to correct the unbalance of the rotor, so that the vibration generated when the rotor rotates or acts on The vibration on the bearing is reduced to the allowable range to achieve the purpose of reducing vibration, improving performance and improving product quality.
It is mainly composed of high-precision mechanical parts and advanced electrical parts, combined into one hard-bearing balancing machine. This series of products is a special balancing machine developed, designed and manufactured by our company based on the core technology at home and abroad.Mainly used in automobile transmission shaft production and repair manufacturers, it has the characteristics of convenient operation, high balance accuracy, and low investment cost. It is an ideal equipment for the dynamic balance detection of automobile transmission shafts. This electromechanical measurement system can be equipped with a microcomputer digital display test, or it can be equipped with a computer measurement, which can be configured according to the actual needs of the user.
|Max Mass of Workpiece(kg)||30||60||100|
|Max diameter of Workpiece(mm)||Ø 100||Ø 120||Ø 150|
|Max length of Workpiece(mm)||1200||1500||2000|
|Balance speed (r/min)||Frequency conversion stepless speed regulation|
|Motor Power (kw)||1.5(Inverter motor)||3(Inverter motor)||3(Inverter motor)|
|The minimum detectable amount(g.cm)||5|
|Measuring surface||2 pieces|
|Measuring system||Microcomputer digital electrical measurement system (optional computer measurement system)|
|Note: The technical parameters of the above series of balancing machines are for reference only. The specific parameters and quotations need to be determined according to the actual situation of the rotor of the user's workpiece, and can also be customized.|
Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006
HZ-9742B Wheel Hub Automatic Unbalance and End Face & Radial Runout Marking Detection Line Wheel Hub Assembly Line