Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006
Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006
Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006

Microcomputer Digital Dynamic Balancing Machine for tire Imbalance reduction rate URR≥95% standard GB/T4201-2006

Double-Sided Vertical Hard Bearing Dynamic Balancing Machine is a kind of vertical structure hard bearing balancing machine with a wide range of uses, which is designed and manufactured by our factory by introducing foreign advanced technology.
Contact number: +86 13711888650
 

Contact Us Download VR


Double-Sided Vertical Hard Bearing Dynamic Balancing Machine is widely used in water pump impellers, brake discs, saw blades, fans, etc. Balance effect of pulleys, hubs and tires.

Features
Double-Sided Vertical Hard Bearing Dynamic Balancing Machine not only has the characteristics of large measurement range, high efficiency, safe and simple operation, and intuitive display, but also occupies a leading position in the domestic balancing machine industry.Standard.


Technical Parameters  

Maximum mass of workpiece (kg) 42
Maximum diameter of workpiece (mm) Φ600
Balance speed (r/min) Variable frequency stepless speed regulation
Motor power (kW) 1.5
Minimum reachable residual unbalance (g.mm/kg) emar≤ 2
Imbalance reduction rate (%) URR≥95%
Measurement Plane (pcs) 2
Fixture Provide 2 sets of product fixtures
Test motorcycle size 16" and 18"
measuring system Equipped with microcomputer digital digital display electric measuring system, live braking speed control device


Power supply and external dimensions
1. Power supply: 380V, 2.2KW
2. Dimensions:
Electric cabinet: 0.6 meters long, 0.6 meters wide, 1.75 meters high
Machine: Length 0.8m × Width 0.6m × Height 1m
3. Serial port: There is a 232 serial port, which cannot output reports, and there is a database
4. Calibration frequency: The manufacturer will arrange calibration before leaving the factory. It is recommended to calibrate once a year in the later stage. Usually, the customer can calibrate it by himself, weigh it with a balance weight, and put it on the machine, and the display is as much as it is.
5. Air inlet trachea diameter: 6mm in diameter

Quality standard:
1. Supplier product manufacturing standard GB/T4201-2006.
2. The supplier's product manufacturing requirements are also in accordance with the technical agreement signed by both parties.

Acceptance:
1. At the supplier, the equipment is subject to factory inspection, and the rotor is checked and verified.
2. At the buyer's place, conduct on-site acceptance of the equipment, conduct practical operations on physical workpieces, and complete the training that should be known and known.

After-sale service:
1. The supplier is responsible for the pre-ex-factory training services for the equipment ordered by the buyer, such as operation, balance calculation, and common troubleshooting.
2. The supplier is responsible for the operation training service for the operator of the purchaser at the purchaser.
3. Once the equipment fails, the company will respond to the support in the fastest way after receiving the notification from the user, and the arrival time will not exceed 24 hours to carry out maintenance work.
4. The supplier is responsible for the free service of the equipment during the "Three Guarantees" period, and is responsible for the lifetime maintenance service and spare parts supply service after the "Three Guarantees".

Recommended Products

Have problems with our Testing Machines?