plastic tensile testing machine is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models. Contact number: +86 137 1188 8650
Equipment summary：
plastic tensile testing machine is designed by mechanical-electrical integration, composition of the force-measuring sensor, transmitter, microprocessor, mechanism of load drive , computer and color inkjet printer. High-precision electronic motor can be set to five-speed, the components are connected by plug-way, Floor-standing models, it is taken account of modern industrial design and ergonomics in modeling and coating.
Rubber Tensile Test Machine can be tested all the materials in stretch, compression, bending, shear, embedded relay, peeling, tearing, crack, etc, such as rubber, plastics, leather, metal, nylon wire, fabric, paper, aerospace, packaging, construction, petrochemical, electrical, vehicle, etc.
Within 1% of the indicating value / within 0.5% of the indicating value
Test machine resolution
Maximum load 1 / 200000, inside and outside is not divided, and the whole resolution is unchanged
Load sensor
Basic configuration: one pull and pressure sensor (maximum load)
Extended configuration: Multiple sensors can be added
Valid test width
390mm (widened by customer requirements)
Effective stretch space
600mm (raised per customer requirements)
Test speed range
0.1～500mm/min
Displacement measurement accuracy
Within 0.5% of indicated value / within 0.2% of indicated value
Deformation measurement accuracy
Within± 0.5% of indicated value (large or small deformation can be selected according to customer requirements)
Test table safety device
Electronic limit protection
Test table lifting device
Fast / slow two speed automatic control, can move
The test table returns the function
Manual or automatic selection, automatic or manual return to the test initial position at the maximum speed
overload protection
After exceeding 10% of the maximum load, the machine automatically protects it
The fixture configuration
A set of tensile fixtures
Host size
800*550*2210mm(length * width * height)
Dynamic system
Taiwan Delta AC servo motor + drive + high-precision ball wire rod
Source
220V、50HZ
Power
400W or 750W (different power motors according on different force values)
Host weight
(About) 300 KG
1.Computer Servo Type Universal Testing Machine
A. High-precision sensor 1ton from U.S.A. Accurate Forces within ± 0.5%.
B. High-precision 24 bits A / D, sampling frequency 200Hz.
C. Power System: Panasonic AC Servo Motor + Driver + CAVEX + precision ball screw.
D. Control System: it is more precise using Pulse Command control modem, the range in speed control is 0.01 ~ 250 mm / min.the board of iron can be adjust to fast and slow by the control board. it is automatically saved after testing .
E. Data transmission: RS232 Transfer.
F. Display: windowsXP test software.
G. easy to control five speed and calibration system.
H. test software can precision control in position, speed, rate of load force and rate of stress, satisfy the different requirements of test.
I. Test space: Testing width is about 400 mm (standard), moving space of active iron 1000mm (excluding fixtures)
J. displacement: coder 2500 P / R, increase four-time accuracy. adopt Japanese Lejing coder that has strong anti-jamming capability, displacement resolution 0.001mm.
Small deformation: Metal extensometers, parsing 0.001mm.
K. Safe equipment : the system would shut down if overload or over-trip
2. The accessories about Computer Servo Type Universal Testing Machine
A. warranted book within one-year and operating instructions.
B. a group of fixture
C. testing software for tensile machine.
D. a set of brand computer, color printer.
The implementation of standards and standard configuration
1. GB/T4689.20-1996measuring fastness of leather’s adhesion 2. QB/T2710-2005measuring leather’s expansion and the rate of elongation 3. QB/T2711-2005measuring tear force of leather 4. QB/T2712-2005measuring leather’s strength and stretch of spherical crack test
