Xenon Test Chamber HZ-2025

Xenon Test Chamber is a kind of comprehensive climate test equipment, support climate aging test, polymer light fastness test. Polymer materials exposed to simulated solar spectrum of artificial light through the glass to assess the light resistance of materials.
Contact number: +86 136 6988 3531

Contact Us Download VR


Xenon Test Chamber is a kind of comprehensive climate test equipment, support climate aging test, polymer light fastness test (Polymer materials exposed to simulated solar spectrum of artificial light through the glass to assess the light resistance of materials). From the light, temperature, rain or condensation, humidity and so on to do the simulation and strengthen test; use simulating full sunlight spectrum xenon arc lamp to simulate the destructive waves of different environment. Can be used for the selection of new materials, improvement of existing materials or evaluate the material durability After material composition changes and other testing.

Machine summary:
The Xenon Testing Chamber Simulate the uv light ,and the machine make the test specimen expensed to uv light,high temperature and water spray to proceed the test! This machine use xenon lamp tube to simulate the sunlight radiation,  use the condensate and spray to simulate the dew and rain. 
Xenon Testing Chamber only need a few days or weeks time, can show the condition or the parts components of aging damage status outdoor many months even a few years time, including colour fading, color change, fracture, fissure, wrinkle, blister, embrittlement, strength reduction, oxidation and so on.

Maintenance of equipment:
Installation site should consider factors such as the cooling efficiency of the machine and easy to check the maintenance, Other installation considerations:
1. The distance between this machine with wall and any other machines should be more than 60cm.
2. Should be set on the ground of the plain, no vibration, and use gradienter examination.
3. Ambient temperature should be keep into 10℃~25℃, the machine can operate in the most stable status. If ambient temperature change too fast, for example change 5℃ or more in a few minutes, the temperature and humidity control and cooling rate, will can’t very stable control.
Should be away from the heat source and inflammable, explosive substance.
4. Do not under direct sunlight, and maintain indoor airiness.
5. Avoid placed in the place of the dust too much.
6. Power supply line and the drain road, should be shortened as much as possible.

 

Technical parameter:

 Model  HZ-2025 Xenon Test Chamber
 Sample exposure area  560cm2
 Performance
 index
 Blackboard or black
 mark temperature
 BST  35°C-100°C
 Spectral wavelength  UV-A340, wave length: 340nm
 Irradiation light source  Full spectrum xenon lamp (air-cooled)
 Irradiance/(w/m2×nm): adjustable
 Xenon lamp power  2.5kw (lifetime: 600-800 hours)
 Temperature and
 humidity control
 system
 Time controller  Import programmable time computer integrated controller (MOELLER)
 Accuracy range  Setpoint accuracy: temperature±0.1°C
 Indication accuracy: temperature±0.1°C
 Temperature Humidity
 Sensor
 Platinum resistance Pt100Ω/mv
 Heating system  The independent system, Nickel-chromium alloy electric heating heater
 Temperature controller  Import integrated microcomputer temperature and humidity controller
 Circulatory system  Low noise of heat-resistant air-condition type motor,
 leafy type centrifugal rotor, Cooling tubes used air-cooled system
 Water spray  As option by buyer
 Accessories  One pc Xenon lamp as spare parts; Filter, calibrator as option by buyer
 Power voltage  AC220V±10% 50±0.5HZ
 Dimension  81x35x75CM   L*D*H
 Weight  60kg

 

 

 

Recommended Products

Have problems with our Testing Machines?