Compliance with standards: 

The metal wire repeated bending test machine is developed and manufactured according to GB/T 238-2013 standard, and also complies with the international standard DIN/ISO 7801 "Metallic materials, metal wire reverse bending test". It is mainly used for repeated bending tests of metal wires and thin steel strips to test the performance of the material in withstanding plastic deformation and the defects displayed during repeated bending.

Scope of application: 

This machine is widely used in manufacturers of steel wire ropes, wires and cables, as well as steel and construction industries. It is suitable for repeated bending tests of φ0.3-φ6 metal wires. If equipped with special auxiliary tools, it can also perform repeated bending tests on 0.1-3 thin steel strips.

Technical Parameters：

Working conditions:

1. Under room temperature 10-35℃ environment, the temperature is 23℃±5℃ for strict temperature requirements;

2. On a stable basis, horizontally installed;

3. In a vibration-free environment;

4. No corrosive substances around;

5. No obvious electromagnetic interference;

6. The power supply voltage fluctuation range does not exceed ±10 of the rated voltage 380V;

7. There should be a certain amount of free space around the test machine.