Aluminum alloy bar tensile tester

Aluminum alloy bar tensile tester can be used for tensile strength, compression, bending, peeling, shearing, tearing, puncture, burst and other tests. It can be prepared according to customer product requirements according to GB, ISO, ASTM, JIS, EN and other standards. Obtain the maximum test force, breaking force, yield force, tensile strength, compressive strength, bending strength, elastic modulus, elongation, constant elongation stress, constant stress elongation and other parameters.

Aluminum alloy tensile machine

1. Automatic reset: the computer receives the test start command, and the measurement system will automatically reset.
2. Automatic return to the car: After the automatic identification of the test breakage, the movable beam will automatically return to the initial position at high speed
3. Automatic save: The test data and experimental conditions are automatically saved to prevent data loss caused by sudden power failure and forgetting to save.
4. Test process: the test process, measurement, display, analysis, etc. are all completed by the microcomputer
5. Display mode: data and curves are dynamically displayed with the test process
6. Result reproduction: the test results can be accessed arbitrarily, and the data curve can be re-analyzed
7. Curve traversal: After the test is completed, you can use the mouse to find the point-by-point force value and deformation data of the test curve, which is convenient and practical for obtaining test data of various materials.
8. Results comparison: Multiple test characteristic curves can be superimposed, reproduced, enlarged, and presented in different colors for analysis and comparison of a group of samples;
9. Curve selection: You can select the stress-strain, force-time, strength-time and other curves to display and print according to your needs;
10. Batch test: After setting the test with the same parameters once, the test of a batch of samples can be completed in sequence;
11. Test report: (according to customer needs)
12. Limit protection: with two levels of program control and mechanical protection;
13. Overload protection: automatic shutdown when the load exceeds 10% of the rated value;
Aluminum alloy tensile machine

1. The maximum test load: can be changed within 100KN);
2. Force measurement accuracy grade: 0.5;
3. Effective force measurement range: 0.2%-100%
4. Force measurement accuracy: within ±0.5% of the indicated value;
5. Test force resolution: ±1/500000 of the maximum test force
6. Test speed adjustment range: 0.001-500mm/min
7. Speed ​​accuracy: within ±0.5% of the indicated value;
8. Deformation measurement range: 0.2%—100% FS;
9. Deformation accuracy: within ±0.5% of the indicated value;
10. Deformation resolution: 1/250000 of the maximum deformation (full resolution remains unchanged);
11. Displacement accuracy: within ±0.5% of the indicated value;
12. Displacement resolution: 0.5µm;
13. Safety device: electronic limit protection;
14. Overload protection: automatic protection over 10% of the maximum load;
15. Data collection frequency: 200times/sec;
16. Effective test stroke: 800mm;
17. Effective test width: 500mm;
Aluminum alloy tensile machine

1. The whole machine is guaranteed for three years (except for consumables), life-long maintenance, and quickly and quickly provide customers with the required accessories (except for human reasons).
2. Establish customer files and implement follow-up services to customers.
3. Regular training. For our company's dealers or customers, due to product upgrades or new products, our company will arrange various forms of unified training at any time according to the specific situation.