All categories
Programmable Constant Temperature & Humidity Test Chamber for Medical Industry

HZ‑2004A programmable constant temperature & humidity test chamber is climatic reliability testing equipment for medical‑device industry. It simulates high‑low temperature, constant and alternating humidity conditions during storage, transportation and application. Suitable for medical catheters, silicone accessories, medical plastic housings, sterile packaging, IVD consumables and polymer medical components. It evaluates product performance changes under temperature‑humidity cycles, inspect aging, deformation, seal failure and performance degradation. Support accelerated stability test for medical‑device shelf‑life assessment. Provide reliable test evidence for medical R&D, incoming‑material inspection, finished‑product reliability verification and registration testing. Widely used in medical‑device manufacturers, R&D labs and third‑party metrology institutes.

Inner chamber adopts SUS304 mirror stainless‑steel, corrosion‑resistant and easy‑to‑clean; outer cabinet optional stainless‑steel or painted finish. Equipped with three‑layer anti‑condensation vacuum observation window with built‑in chamber lamp for direct sample inspection. Φ50 mm test cable port on left side for power‑on and signal connection of medical specimens. Adopt Korean TEMI880 Chinese‑English 7‑inch touch‑screen controller, support fixed‑value & multi‑segment program operation, store up to 999 groups of programs, real‑time temperature‑humidity curve display and auto fault alarm. RS‑232 communication interface for PC connection and data export. Refrigeration system with original French Tecumseh compressor and eco‑friendly R404A refrigerant; high‑efficiency W‑type heating tube for fast heating/cooling response. Multiple safety protections: over‑temp, over‑humidity, compressor high/low pressure, water‑shortage, electric‑leakage and overload protection. Equipped with mobile casters & leveling feet. Multiple chamber volumes available, custom‑size service supported. Compliant with YY/T0681, GB/T2423 series, IEC60068 climatic test standards.


  1. Multi‑mode temperature‑humidity environment simulation: Realize high‑temp storage, low‑temp storage, constant damp‑heat and alternating damp‑heat cycles. Reproduce environmental stress during medical‑device storage, logistics and application for reliability and accelerated aging test.

  2. Programmable cyclic test: TEMI880 bilingual touch‑screen, edit multi‑segment temperature‑humidity programs with segment time & cycle count for auto run; fixed‑value mode for standard medical stability test conditions.

  3. Visual test progress & data output: Three‑layer anti‑fog observation window for direct sample viewing; real‑time temperature‑humidity curve display. RS‑232 communication for PC data recording & export for report archiving. Φ50 mm cable port supports powered‑on sample testing.

  4. Wide adjustable temperature‑humidity range: Optional temperature‑70℃~+150℃, humidity 20%‑98%RH, high control accuracy and chamber uniformity to meet strict medical registration test requirements.

  5. Comprehensive safety protection: Over‑temp / over‑humidity power‑off, compressor high‑low pressure protection, water‑shortage alarm, electric‑leakage & overload multi‑protection. On‑screen fault prompt to protect machine and valuable medical specimens.

  6. Multiple sizes & custom service: Standard volume from 80L‑1000L, custom inner‑chamber dimension according to medical‑sample size; optional recorder, sample shelves for medical devices, consumables and packaging components.


Model

HZ-2004A(1000L)

Inside size W*H*D(cm)

100x100x100

Outside size W*H*D(cm)

150x186x157

Temperature Range

-40℃~+120℃

Humidity Range

20%~98%R.H.

Accuracy/ Uniformly

±1.0℃;±3.0%R.H.

Accuracy / Volatility

±1.0℃;±2.0%R.H.

Heating / Cooling Time

About 3.0℃/min;about 1.5℃/min

Inside Material

Stainless steel SUS 304#

Insulation Material

High-temperature high-density amino acid ethyl ester foam insulation materials,

Cooling System

Air-cooled/ single-stage compressor(-20℃) ,wind, water cooled/two-stage compressor(-40℃)

Protection

Compressor overload switch, high and low pressure protection switch, over-humidity-temperature protection switches, fuses, warning system

Accessories

Recorder(purchase)、view window、50mm testing hole、PL lamp、clapboard、Dry and wet gauze ball

Controller

Touch screen controller from South Korea,  with PC interface

compressor

France “Tecumseh”

power

3Φ 415VAC±10% 50 (Transformer supplied by user themselves)


Constant Temperature and Humidity Testing Chamber(1).jpg


Related Products